|
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
[Michael A. Fopp...]
> It took 4 minutes to transfer 1 US Gal. This seems a
> long time to me and means that at 7 gph the pumps are going to be on over
> half the time! Can anyone enlighten me further of the time it takes in
> their aircraft.
Michael -
In order to maintain fuel balance in both wings and accomplish
fuel transfer more rapidly, I always turn both fuel pumps on together. I
have a sight gauge for my 10 gallon header tank and generally initiate fuel
transfer at 1/2 tank depletion.
(You can view my sight gauge on my webpage
http://sites.netscape.net/wrumburg/homepage.html )
At 8 - 10 gph fuel burn, it takes about 30 minutes to deplete 1/2
tank, then about 10 minutes to refill with both pumps on. The fuel pumps
then have about a 25% duty cycle.
> On the matter of Dynafocal mounts - I do not understand how Vern can say
> that they are the same. The geometry of the mounting points is very
> different.
With regard to DynaFocal engine mounts, they are designed so that
the focal point of the four mounting bolts is(approximately) the the center
of mass of the engine/prop combination. The Type II was developed
specifically for the Twin Comanchee, because it's long prop extension
resulted in a considerably more forward center of mass.
Bill Rumburg
N403WR (Sonic bOOm)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website: http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore: http://www.buildersbooks.com/lancair
Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
|
|