Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Wed, 02 Jan 2008 16:55:19 -0500
Message-ID: <redirect-2628367@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=209.86.89.62; envelope-from=artbertolina@earthlink.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=dk20050327; d=earthlink.net;
  b=MsDTVxC3uXiYDYHhJ+bsOVYZKf8dHrUgRQ/GXBptpcE5jnahwV3JeTwC6U3MmpH8;
  h=Received:Message-ID:From:To:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE:X-ELNK-Trace:X-Originating-IP;
From: "Art Bertolina" <artbertolina@earthlink.net>
References: <list-2627112@logan.com>
Subject: Re: [LML] Re: GRT HX EFIS
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

Tom
Sorry I thought about something didn't think of in my
first response. Connecting the box to the panel. When
I attached the GRT EFIS to the panel I drilled hole
through the panel put the box through the panel and
used a 3 side rectangular piece of AL 1/2" wide with
nut plates in the corners, dropped this horseshoe affair
over the top of the box behind the panel and put screws
through the panel and screwed into the nutplates works
fine. My plan is to make new holes or move the old ones
out, make the rectangle a little larger and use the same
connect process.
Art
----- Original Message ----- 
From: "Tom Gourley" <tom.gourley@verizon.net>
To: <lml@lancaironline.net>
Sent: Tuesday, January 01, 2008 12:49 PM
Subject: [LML] Re: GRT HX EFIS


> "I have the old series 1 and like it, would consider upgrading to the HX"
>
> Art,
>
> Are you aware that the HX box won't fit in the same space as the original 
> Series 1?  The width is slightly different, 7.1" vs 7.25", but the HX is 
> 0.5" taller.  Upgrading will require panel modifications.
>
> Tom Gourley
>
>
>
>
> --
> For archives and unsub 
> http://mail.lancaironline.net:81/lists/lml/List.html
>