|
Re; LNC2's
How many have just a flat section where the canopy
frame rests on the Longerons?
There are a couple ways to do it, one involving a
channel. I currently have a channel type closure. A 1/2" lip that
extends down over the longeron on the inside of the frame. And a little
1/4" lip that covers the exterior side of the longeron when the canopy is
closed. Problem is that I want a nice continuous seam line from the
canopy to the header to the cowling. In order to get this I have to sand
off almost all of the exterior lip of teh canopy rail. This would make my
canopy sit flat on the top of the longeron and I would only have a interior rail
now. Im worried this would cause large air leaks.
Bryan
|