X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Mon, 23 Jul 2007 07:23:42 -0400 Message-ID: X-Original-Return-Path: Received: from vms040pub.verizon.net ([206.46.252.40] verified) by logan.com (CommuniGate Pro SMTP 5.1.10) with ESMTP id 2193391 for lml@lancaironline.net; Sun, 22 Jul 2007 21:05:46 -0400 Received-SPF: pass receiver=logan.com; client-ip=206.46.252.40; envelope-from=sbej@verizon.net Received: from [192.168.0.102] ([75.82.233.22]) by vms040.mailsrvcs.net (Sun Java System Messaging Server 6.2-6.01 (built Apr 3 2006)) with ESMTPA id <0JLL004CYXO5136F@vms040.mailsrvcs.net> for lml@lancaironline.net; Sun, 22 Jul 2007 20:04:54 -0500 (CDT) X-Original-Date: Sun, 22 Jul 2007 18:04:55 -0700 From: Bryan Wullner Subject: LNC2 Elevator Controls X-Original-To: Lancair Mailing List X-Original-Message-id: <7D0E10EE-7F1F-4F2B-92F4-4396840C99AD@verizon.net> MIME-version: 1.0 (Apple Message framework v752.3) X-Mailer: Apple Mail (2.752.3) Content-type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Content-transfer-encoding: 7bit Anybody going thru this step or remember how they did it please email. I am installing the Elevator push/pull tubes and the pivot assembly with the bob weight. If I set the sticks to vertical and line up the FWD rod end bolt below the 1/4" pivot bolt and make it accessible thru the oval cutouts the Bob weight does not go to the dimensions in the plans with stick movement. The plans say the bob weight should stop about 1/4" above the rear push/pull tube at full fwd stick. Mine stops about 5 inches above it. I get full travel to my elevator stops and everything works properly but this bob weight dimension. Is there any cause for re- work on this matter? Thanks Bryan