Would like some interpertation help from some other builders on the Flap bellcrank bulkhead for 320/360.

According to manual the right flap bellcrank bulkhead has as "approximate 3-4 degree aft lean". This is understandable, but my confusion comes from the directions for the left side assembly. It states that "This bulkhead will be positioned true vertical but the bellcrank assembly will be mounted such to be leaning aft by 3-4 degrees." With the bulkhead mounted vertical it would seem that I would have to shim the bellcrank assembly out to make the 3-4 degrees. As it is mounted now (vertical), I do not have the needed 3-4 degrees.

Interested how others interpreted this and did the install. Thanks,
Eric Demaray
LNC2 SB