|
Terrence,
My engine is a Lycon forward injector like yours. The
injectors are in the 4 top ports.
The manifold pressure pickup is the bottom port on cyl
#4. It is a SS braid over teflon
with a right angle connector on one end. The Tee feeds MP to the
electronic ignition,
and the pressure sensor is on the back of the
firewall.
Posted for "terrence o'neill"
<troneill@charter.net>:
Who might have a suggetion for a manifold
pressure port, or location for
same, on the Lycoming O-320-B2B, converted
to IO. The conversion uses the
priming ports on the cylinders for
injection, and the engine oil sump has been
modified by LyCon to a forward
mounted injector.
Where should I plug in or tap for manifold
pressure?
Thanks,
Terrence
L235/320 N211AL
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
No virus found in this incoming message.
Checked by AVG
Free Edition.
Version: 7.5.467 / Virus Database: 269.6.5/792 - Release
Date: 5/6/2007 9:01 PM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.6.5/792 - Release Date: 5/6/2007 9:01 PM
|