Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Thu, 19 Apr 2007 11:38:48 -0400
Message-ID: <redirect-1993917@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=68.142.198.202; envelope-from=lorn@dynacomm.ws
Mime-Version: 1.0 (Apple Message framework v752.3)
Content-Type: text/plain; charset=ISO-8859-1; delsp=yes; format=flowed
Content-Transfer-Encoding: quoted-printable
From: Lorn H Olsen <lorn@dynacomm.ws>
Subject: Re: Gear Trouble

Randy,

You may have a point! Whenever I have my cabin heater on, the cabin =20
temp at my feet is about 170=B0F. The rest of the cabin is just about =20=

20=B0F higher than the outside. I don't have passenger brakes so the =20
brake hydraulics are all by my feet. Increasing the temperature this =20
much at the hydraulic reservoir could pressurize the system.

I still don't understand why the low side doesn't stay at 0 PSI. =20
After all it went to 0 when the gear lever went to the up position.

Lorn

> From: randy snarr <randylsnarr@yahoo.com>
> Date: April 18, 2007 7:01:45 PM EDT
>
> Lorn,
> I have seen this too.
> One thing I have noticed is this usually happens when it is cold =20
> either due to altitude or season. The low side pressurizes only =20
> when the cabin heater is on.
> .
> .
> Randy Snarr
--
Lorn H. 'Feathers' Olsen, MAA, DynaComm, Corp.
248-345-0500, mailto:lorn@dynacomm.ws
LNC2, FB90/92, O-320-D1F, 1,300 hrs, N31161, Y47, SE Michigan