Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Thu, 01 Mar 2007 22:23:58 -0500
Message-ID: <redirect-1877625@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.67; envelope-from=paulhershorin@bellsouth.net
From: <paulhershorin@bellsouth.net>
Subject: Re: [LML] Re: 360 over heating problems resolved
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

I would climb to 1000 ft and level off until temp came down to 220--I would climb 500 ft and have to level off again to bring temps down--at the same time the cylinders were very hot--If I had known that the servo was the real problem I would have done that first and then seen the effect on the oil temp.  Once I got to altitude the cylinder temps were 410 to 435 and the smallest of climbs the temps would go right up.  
Paul Hershorion
> 
> From: "Zavatson, Christopher J \(US SSA\)" <Christopher.Zavatson@baesystems.com>
> Date: 2007/03/01 Thu PM 09:12:37 EST
> To: lml@lancaironline.net
> Subject: [LML] Re: 360 over heating problems resolved
> 
> Paul,
> 
> <<1.  My  oil temps ran 250+ (red line) until I did the following--I put
> a naca scoop in the center of my top cowling with a 3 inch flex tube to
> the oil cooler and closed the 3 inch hole behind # 3 cylinder.  My temps
> now are 185 to 190.>>
> 
> What impact did fix number 1 have on CHTs in cruise for the various
> cylinders (@ full throttle and leaned for best power)? 
> Chris
> 
> 
> Chris Zavatson
> N91CZ
> 360std
> www.N91CZ.com
> 
> 
> --
> For archives and unsub http://mail.lancaironline.net/lists/lml/
>