Sender: <marv@lancaironline.net>
To: lml
Date: Thu, 16 Nov 2006 07:51:19 -0500
Message-ID: <redirect-1572160@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=68.142.198.211; envelope-from=rjones2000@sbcglobal.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=sbcglobal.net;
  h=Received:X-YMail-OSG:From:To:Subject:Date:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:X-MimeOLE:Thread-Index:In-Reply-To;
  b=u1yJVosKxlhP6pYSlYzLgxsvgosAj55alJGQrJxrHeAj9bX7JGJDuDapakvBFzHGFEO3H23aieKOBNcv0FhDZueoCq+I77a2FtPKkMh+iCAjIbkH0Om4LrVC+hbdPOeRB56OJ2VgjXeDUBvo9zqspHUHpK7zvldsCb/dHFKe6Cs=  ;
From: "rjones2000" <rjones2000@sbcglobal.net>
Subject: RE: [LML] Re: Elevator Trim Tab Travel
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: AccIZkiJyAIt+WxZTbmY/uOd2cMLjwBEN98A
In-Reply-To: <list-1566584@logan.com>

Kevin,

Adjust the trim tab threaded rod so that the tab moves the same amount up
and down. Using a small ruler works well.

Do not cover the hinge and screws with micro as you may need to service the
hinge pin.

Of course, ensure there is no binding or interference at full travel.

Ron Jones

Legacy Innovations, LLC.

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Kevin
Kossi
Sent: Tuesday, November 14, 2006 7:29 PM
To: Lancair Mailing List
Subject: [LML] Re: Elevator Trim Tab Travel

Does anyone know how many degrees the Elevator Trim Tab travels up & down?

Also do you cover the Trim Tab hinge and screws with the Micro?


Thanks


Kevin Kossi
Legacy 72%
New York

--
For archives and unsub http://mail.lancaironline.net/lists/lml/