All,

I've decided to create a "wirebook" for my Legacy and I figured, I'd share
:).  I figured that if I was going to be doing my own wiring, that I wanted
to have it all documented in schematics.  Hopefully this will make the
process of doing the wiring much easier.

To support this, I've created a sticky thread on the Legacy Builders Forums
(http://legacyfg.jconserv.net/index.php), in the "Wiring" section.  As of
today, I've added the pitch and yaw trim functions and will continue to add
other functions as I build out the schematics.  For anyone building a
Legacy, and planning to wire it, this should be a huge time saver.

In this thread, I'm attaching both pictures of the drawings, and the actual
files at each release and update.  These will be released in TurboCad
Designer v12 format, DXF, and the thread will include a associate PNG
picture at each release.  Version history will also be maintained so that
you can determine if you have the latest version or note.

I'd invite any of you that want to follow along and get the files to
register on the Legacy builders forums and download the files.  Obviously,
this is an interactive forum so you can post questions, corrections or
suggestions as you wish.  Ya never know if I'll get an LED in backwards or
not :).

Have fun and let me know what you think as I slowly progress along... It's
amazing how slow putting this together has been (and I'm only starting).
Learning a new piece of software didn't help :)

Alan