Mailing List lml@lancaironline.net Message #35810
From: Jerry Grimmonpre <jerry@mc.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Solder sleeves
Date: Thu, 11 May 2006 20:15:23 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
Angier ...
Look at http://www.steinair.com/
then to:
electrical
then to:
heat shrink the first item
Jerry Grimmonpre'

----- Original Message ----- From: "Greenbacks, Ltd." <N4ZQ@comcast.net>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Thursday, May 11, 2006 6:52 PM
Subject: [LML] Re: Solder sleeves


Greetings,

Any of you got a source for solder sleeves that would accommodate 1  22ga wire plus braided shield? I'm making up harnesses for the PS  Engineering PMA4000 audio panel/intercom and have several 3 conductor  shielded cables which require one wire plus the shield to be grounded  to one of the crimped connector pins. Seems like a solder sleeve  would be a good solution.

Angier Ames
N4ZQ
N3ZQ

--
For archives and unsub http://mail.lancaironline.net/lists/lml/
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster