Mailing List lml@lancaironline.net Message #35261
From: James Cameron <toucan@Satx.rr.com>
Sender: <marv@lancaironline.net>
Subject: Wiring: ground or return tricks
Date: Mon, 17 Apr 2006 22:41:48 -0400
To: <lml@lancaironline.net>
    Good discussion on circuit returns, otherwise known to most of us as "grounding."  A very good aid for proper wiring is Bob Nuckolls' "forest of tabs," available from B&C Electronics.  It's a pair of brass plates, one for each side of the firewall, with a brass bolt to connect through.  Each plate has a number of male Fast-On tabs soldered to it; the pair I like has 48 tabs on the aft (cabin) side and 24 on the foreward side.  You connect the bolt to the battery negative with your main bus wire (2/0 or so in size), then make ALL your return (ground) connections to these plates.  With this single-point ground arrangement you will have much quieter radio and intercom performance.  If you run out of tabs, you can bunch up several wires in one crimped female connector.  So long as this is the first place the return signal wires come together, all will be well.  Having the tabs on the firewall side also reduces the number of wires that must come through the firewall.
 
   Bob Nuckolls has also put together a book on wiring experimental aircraft.  Highly recommended and also available from B&C.
 
Jim Cameron
Boerne, TX
 
 
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster