Return-Path: <marv@lancaironline.net>
Received: from [69.171.52.140] (account marv@lancaironline.net)
  by logan.com (CommuniGate Pro WebUser 4.2.8)
  with HTTP id 607831 for lml@lancaironline.net; Fri, 14 Jan 2005 21:54:32 -0500
From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: Tool Time
To: lml
X-Mailer: CommuniGate Pro WebUser Interface v.4.2.8
Date: Fri, 14 Jan 2005 21:54:32 -0500
Message-ID: <web-607831@logan.com>
In-Reply-To: <auto-000000607816@logan.com>
References: <auto-000000607816@logan.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit

Posted for "Steve/Claudette Colwell" <colwells@comcast.net>:

  I ran across a new to me, Carbide Burr for my Dremel Tool at Lowe's.  The
  Dremels are the most used tools in my shop, except sandpaper and the Vac.
  This Burr is mucho faster cutting than the beaded Dremel brand Burrs I have
  been using.
  
  If you want to check it out, look for Foredom #85242 Contour Shaping 1/8"
  shank in the Typhoon series.  They are priced at about $15.00, or look at
  http://www.blackstoneind.com/ordermaxx/foundations/store/documentwarehouse/documents/350-0302-31-typhoons_v1.pdf 
 KB18914 is the part number that  applies to this list. 
 http://www.foredom.com
  
Foredom #85242 Contour Shaping 1/8" Shank was on the Blister Pack of the one
  I bought.
  
  Steve Colwell  Legacy-in-the-shop