< Yep Scott, and the filing that you see is
definitely overdone. Might have been able to get away with none. Just a little
would have been fine. Even so, what you see is the product of maybe 4 or 5
minutes with a file.
Bill >
I positioned each
caliper on the wheel casting (7 O'clock position as viewed from the outboard
right side, 5 O'clock from the left) to see the interference with the
casting and marked the location with a marker pen. I then used a
dremel with a small sandiing disc to achieve the required small notch, checking
as I went. The sanding disc cut the exact notch required and only took a couple
of minutes on each side.
Bill
Rumburg
N403WR