I am building an old 360 kit. the trailing edge of the flap on the right wing is about 1/2" above the wing root on the fuslage. the left one lines right up. has anyone had this problem and what did you do? thanks larry

Larry,

 

Put your flaps down when showing the airplane!

 

Seriously, you should be only concerned about how the airplane flies with the flaps in varioius configurations.  If you are courageous, try stalls with the flaps in various positions - after all, the rate of extension may also vary from side to side.

 

Flap rigging is comensurate with playing chess using nothing but pawns.......

 

Good Luck,