Return-Path: Sender: "Marvin Kaye" To: lml@lancaironline.net Date: Mon, 08 Nov 2004 21:20:24 -0500 Message-ID: X-Original-Return-Path: Received: from [195.3.96.91] (HELO email11.aon.at) by logan.com (CommuniGate Pro SMTP 4.2.5) with SMTP id 523494 for lml@lancaironline.net; Mon, 08 Nov 2004 18:28:39 -0500 Received-SPF: none receiver=logan.com; client-ip=195.3.96.91; envelope-from=lancair@meier.cc Received: (qmail 335360 invoked from network); 8 Nov 2004 23:28:09 -0000 Received: from m249p021.adsl.highway.telekom.at (HELO MC) ([62.47.199.21]) (envelope-sender ) by email11.aon.at (qmail-ldap-1.03) with SMTP for ; 8 Nov 2004 23:28:09 -0000 From: "Christian Meier" X-Original-To: "Lancair Mailing List" Subject: AW: [LML] Re: Legacy Rudder Stiffness X-Original-Date: Tue, 9 Nov 2004 00:28:09 +0100 X-Original-Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Charles, It would be very kind, if you can send me your instruction for the injector. Regards, Christian 360 c@meier.cc -----Ursprüngliche Nachricht----- Von: Lancair Mailing List [mailto:lml@lancaironline.net]Im Auftrag von Charles R. Patton Gesendet: Montag, 8. November 2004 20:01 An: Lancair Mailing List Betreff: [LML] Re: Legacy Rudder Stiffness Steve Williams wrote: >Does anyone know where to get the Teflon powder and insertion device for lubricating the rudder cables? >Any other advice for "loosening up" the rudder system? >Steve Williams # 206 > > Steve, I designed the original Teflon injector and sent it around to various members to use. Unfortunately, it ended up with a member who died while it was in his possession and it is now lost. If you (or anybody else who) want, email me, and I'll send you the instructions (WORD), diagrams and photos (JPG's)(about 500KB). The list recently had a source for Teflon powder: http://www.spurlocktools.com/id39.htm as I understand it is unavailable from the original source, Dick Simkanin, at this time. Regards, Charles Patton -- For archives and unsub http://mail.lancaironline.net/lists/lml/