Return-Path: Sender: "Marvin Kaye" To: lml@lancaironline.net Date: Mon, 08 Nov 2004 14:00:58 -0500 Message-ID: X-Original-Return-Path: Received: from out005.verizon.net ([206.46.170.143] verified) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 522913 for lml@lancaironline.net; Mon, 08 Nov 2004 13:13:46 -0500 Received-SPF: none receiver=logan.com; client-ip=206.46.170.143; envelope-from=charles.r.patton@ieee.org Received: from ieee.org ([4.15.149.200]) by out005.verizon.net (InterMail vM.5.01.06.06 201-253-122-130-106-20030910) with ESMTP id <20041108181311.MKLT20108.out005.verizon.net@ieee.org> for ; Mon, 8 Nov 2004 12:13:11 -0600 X-Original-Message-ID: <418FB759.2040305@ieee.org> X-Original-Date: Mon, 08 Nov 2004 10:13:45 -0800 From: "Charles R. Patton" Reply-To: charles.r.patton@ieee.org User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.5) Gecko/20031007 X-Accept-Language: en-us, en MIME-Version: 1.0 X-Original-To: Lancair Mailing List Subject: Re: [LML] Legacy Rudder Stiffness References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Authentication-Info: Submitted using SMTP AUTH at out005.verizon.net from [4.15.149.200] at Mon, 8 Nov 2004 12:13:10 -0600 Steve Williams wrote: >Does anyone know where to get the Teflon powder and insertion device for lubricating the rudder cables? >Any other advice for "loosening up" the rudder system? >Steve Williams # 206 > > Steve, I designed the original Teflon injector and sent it around to various members to use. Unfortunately, it ended up with a member who died while it was in his possession and it is now lost. If you (or anybody else who) want, email me, and I'll send you the instructions (WORD), diagrams and photos (JPG's)(about 500KB). The list recently had a source for Teflon powder: http://www.spurlocktools.com/id39.htm as I understand it is unavailable from the original source, Dick Simkanin, at this time. Regards, Charles Patton