Return-Path: Sender: "Marvin Kaye" To: lml@lancaironline.net Date: Sat, 30 Oct 2004 21:50:13 -0400 Message-ID: X-Original-Return-Path: Received: from a34-mta02.direcway.com ([66.82.4.91] verified) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 492531 for lml@lancaironline.net; Sat, 30 Oct 2004 21:45:54 -0400 Received-SPF: none receiver=logan.com; client-ip=66.82.4.91; envelope-from=billhogarty@direcway.com Received: from BILLS (dpc691984131.direcpc.com [69.19.84.131]) by a34-mta02.direcway.com (iPlanet Messaging Server 5.2 HotFix 1.25 (built Mar 3 2004)) with SMTP id <0I6F00AA5E7AXQ@a34-mta02.direcway.com> for lml@lancaironline.net; Sat, 30 Oct 2004 21:45:16 -0400 (EDT) X-Original-Date: Sat, 30 Oct 2004 18:45:10 -0700 From: billhogarty Subject: L-IV Hydraulic Problem X-Original-To: Lancair Mailing List X-Original-Message-id: <002a01c4beeb$44802fa0$6401a8c0@BILLS> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Mailer: Microsoft Outlook Express 6.00.2900.2180 Content-type: multipart/alternative; boundary="Boundary_(ID_MDocXG8MrmZvhPDrB3/MBg)" X-Priority: 3 X-MSMail-priority: Normal This is a multi-part message in MIME format. --Boundary_(ID_MDocXG8MrmZvhPDrB3/MBg) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Anyone run into this problem ?? My hydraulic pump has started to run continuously at 900 PSI instead of shutting off at 1100 PSI I should mention that the gear operates normally but then the pump runs continuously without going above 900 PSI. This happens in both the up and the down gear position. My first reaction was to check fluid level-----which was O.K. Second reaction was to check for leaks ----- none Third reaction was to see if anyone else had similar problem. All comments/suggestions appreciated. Thanks billhogarty@direcway.com --Boundary_(ID_MDocXG8MrmZvhPDrB3/MBg) Content-type: text/html; charset=iso-8859-1 Content-transfer-encoding: 7BIT
Anyone run into this problem ??
 
My hydraulic  pump has started to run continuously at 900 PSI instead of shutting off at 1100 PSI
 
I should mention that the gear operates normally but then the pump runs continuously without going above 900 PSI.  This happens in both the up and the down gear position.
 
My first reaction was to check fluid level-----which was O.K.
Second reaction was to check for leaks ----- none
Third reaction was to see if anyone else had similar problem.
 
All comments/suggestions appreciated.  Thanks
 
 
--Boundary_(ID_MDocXG8MrmZvhPDrB3/MBg)--