From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [LML] LNC2 Flap Rods (Long Question)
To: lml
Date: Mon, 08 Mar 2004 15:03:26 -0500
Message-ID: <web-3069379@logan.com>
In-Reply-To: <24.50b502af.2d7e262a@aol.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit

Posted for Tubamanflies@aol.com:

Lee,

I got out the manual and had a look.  I can see how the FL11 rod could be 
different lengths on both sides.  When you talked to Lancair did you tell them 
that you did not have the MKII flaps.  I am assuming you have the original 320 
flaps from your discription.  The rods you got may be for the MKII.  It looks 
the length of the rods is set by the placement of the FL5 bellcrank bracket 
and 
the movement of the flaps, full and equal.  

For my nickel I would check with Lancair, Vern, to see if you got the right 
thing.  If you can't get a longer rod from Lancair I would go out and get some 
5/16" stainless steel rod. Cut it to the length of the original 1/4" rod and 
have them threaded.  That way you are not jumping through hoops trying to make 
the wrong thing work.

Good Luck

Ray .