Return-Path: Sender: (Marvin Kaye) To: lml@lancaironline.net Date: Sun, 01 Feb 2004 14:53:26 -0500 Message-ID: X-Original-Return-Path: Received: from sccrmhc11.comcast.net ([204.127.202.55] verified) by logan.com (CommuniGate Pro SMTP 4.1.8) with ESMTP id 2960754 for lml@lancaironline.net; Sun, 01 Feb 2004 01:53:36 -0500 Received: from steve (c-67-166-133-229.client.comcast.net[67.166.133.229]) by comcast.net (sccrmhc11) with SMTP id <2004020106533601100drc0se>; Sun, 1 Feb 2004 06:53:36 +0000 From: "the colwells" X-Original-To: "'Lancair Mailing List'" Subject: Re: Box Fan Filter X-Original-Date: Sat, 31 Jan 2004 22:55:50 -0800 X-Original-Message-ID: <000001c3e890$6dacc640$e585a643@steve> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2627 Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 The handiest tool in my shop, next to the Dremel, is my remotely mounted Shop Vac. By locating it outside with 2" PVC Pipe, the screaming noise is barely audible and the exhaust air does not blow up dust on the floor. I have the 2"x10'long hose dropped from the center of the ceiling so it is easy to access anything in the shop. The switch is mounted on the hose end for convenience. So what does this have to do with a Box Fan Filter? Any Sanding or Dremel operation has the Vac running with the nozzle right-at-the-work. Makes for a very sanitary operation. I think it's a better alternative to a Box Fan Filter. I wear a Particle Mask too because I finally found one that is comfortable. 3M has a super soft, lightweight, reusable one with replaceable filters. It's a #7502 and I highly recommend it. Steve Colwell Legacy