|
|
Posted for "S. Reeves" <sreeves@sc.rr.com>:
How did you make the electric flap. I need to make some cowl exit space myself ( I have none except for a shark gill on the side and a couple on the bottom). I'd like to make one under the rear of the cowl that would move up and down. If I get my exit area straightened out I think my oil temps will be great.
Steve
Glasair IFT
I routed a 2 1/2 inch scat tube from just inside the left inlet back to the oil cooler and dumped it into the box. I, also, created an electric flap out of the rear section of the nose gear fairing. It opens to create about 20 square inches of exit area for air behind the engine.
Jim Scales
|
|