Mailing List lml@lancaironline.net Message #21619
From: Tom Williams <tfsent@worldnet.att.net>
Sender: Marvin Kaye <marv@lancaironline.net>
Subject: RE: [LML] Re: Help wanted with rudder/aileron trim tabs
Date: Wed, 26 Nov 2003 01:40:41 -0500
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
if you don't use a tab on the control, you can use springs from the trim
servo.  much easier and works the same.  may have to experiment with
different spring tensions.
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster