|
Message
I am finishing up
the Horizontal Stab and Elevators. The IV-P plans are not very specific on how
you route the wire from the elevator to the fuselage. Would like any
suggestions. My thought is to run a flexible tube from the elevator, passing by
the pivot point of the elevator, then down into the fuselage and forward. I do
not want to run the wire at this time, but put in a flexible tube so that I
have a wire run when I string the electrical cable from both the elevator and
the rudder. I would plan on running the rudder the same way and then from the
access panel, a single route to the instrument panel.
Giffen A.
Marr
Lancair IV-P/20B
5+%
|