Return-Path: Received: from [65.33.85.194] (account ) by logan.com (CommuniGate Pro WebUser 4.1b9) with HTTP id 2470486 for lml@lancaironline.net; Thu, 10 Jul 2003 01:30:21 -0400 From: "Marvin Kaye" Subject: Re: [LML] Re: Mounting the Crossbow 500 AHRS To: lml X-Mailer: CommuniGate Pro WebUser Interface v.4.1b9 Date: Thu, 10 Jul 2003 01:30:21 -0400 Message-ID: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format="flowed" Content-Transfer-Encoding: 8bit Posted for "glong2" : Mine does the same thing. I assume when there is a +V(feet/min) the little airplane will be above the horizon because what we are simulating on the ground is flying at a constant altitude with the nose pointed up. Anyone flying an AHRS 500 that can verify this? Eugene Long Lancair Super ES glong2@netzero.net >>>While we're on the subject of Crossbows and EFISes, I fired up the panel today after putting the AHRS into position, just to make sure that we had communications and that the EFIS would display properly. I noticed that when I rotated the AHRS in the roll axis the little airplane in the center 9of the EFIS) would remain aligned with the airframe, and the horizon would roll as expected. When I rotated the AHRS in the pitch axis, though, the little airplane remained centered on the rising or falling horizon until I got to about 15-20 degrees, at which time a little ghost circle appeared in the center of the screen that looked to correspond with the nose up or nose down attitude relative to the displayed horizon. Is this normal?<<<