|
"Don't know how many of you have had a problem with
this. I have been fitting the center console and setting the panel / dust shield
in place. I would close the canopy and at first the panel / dust shield sat way
too high. I have had to cut away the entire lower flange and about 1/8" more to
get the canopy to close without contacting anything. I have seen Don Barnes had
to do this and was curious if this is a common problem."
John Link
I believe its important to keep the panel high for leg
room, But the glare shield/dust shield needs extensive rework to fit under
the defroster chamber at the base of the canopy.
|