Return-Path: Sender: (Marvin Kaye) To: lml Date: Fri, 20 Jun 2003 13:52:13 -0400 Message-ID: X-Original-Return-Path: Received: from imo-d04.mx.aol.com ([205.188.157.36] verified) by logan.com (CommuniGate Pro SMTP 4.1b8) with ESMTP id 2437080 for lml@lancaironline.net; Fri, 20 Jun 2003 10:14:48 -0400 Received: from JLINKJR@aol.com by imo-d04.mx.aol.com (mail_out_v36.3.) id q.c.13880e55 (1320) for ; Fri, 20 Jun 2003 10:14:43 -0400 (EDT) From: JLINKJR@aol.com X-Original-Message-ID: X-Original-Date: Fri, 20 Jun 2003 10:14:43 EDT Subject: legacy center console X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_c.13880e55.2c2470d3_boundary" X-Mailer: 8.0 for Windows sub 6011 --part1_c.13880e55.2c2470d3_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Don't know how many of you have had a problem with this. I have been fitting the center console and setting the panel / dust shield in place. I would close the canopy and at first the panel / dust shield sat way too high. I have had to cut away the entire lower flange and about 1/8" more to get the canopy to close without contacting anything. I have seen Don Barnes had to do this and was curious if this is a common problem. John Link --part1_c.13880e55.2c2470d3_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Don't know how many of you have had a problem with thi= s. I have been fitting the center console and setting the panel / dust shiel= d in place. I would close the canopy and at first the panel / dust shield sa= t way too high. I have had to cut away the entire lower flange and about 1/8= " more to get the canopy to close without contacting anything. I have seen D= on Barnes had to do this and was curious if this is a common problem.

John Link --part1_c.13880e55.2c2470d3_boundary--