Return-Path: Sender: (Marvin Kaye) To: lml Date: Tue, 27 May 2003 18:42:59 -0400 Message-ID: X-Original-Return-Path: Received: from [67.29.153.40] (HELO dparsons.com) by logan.com (CommuniGate Pro SMTP 4.1b6) with ESMTP id 2364784 for lml@lancaironline.net; Tue, 27 May 2003 12:46:32 -0400 Received: from QAUDAP1800 [38.113.130.49] by dparsons.com with ESMTP (SMTPD32-8.00) id A69FCA30034; Tue, 27 May 2003 12:47:27 -0400 X-Original-Message-ID: <002201c3246f$88069b50$831ca8c0@QAUDAP1800> Reply-To: "Don Parsons" From: "Don Parsons" X-Original-To: "Lancair Mailing List" References: Subject: Re: [LML] Tool time! - Spotting Bubbles X-Original-Date: Tue, 27 May 2003 11:46:32 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 I figured out a little trick that makes it real easy to spot those bubbles. Use some light source, such as a bright flashlight, to back light the part from the opposite side from where you are inspecting for bubbles. You don't need a lot of the light to come through the part. If almost any of the light is able to shine through, and usually this is the case, the bubbles light up more than the surrounding lay-up. Even the very little bubbles become incredibly easy to spot. I will have to try your roller idea. Seems like it would be easy to clean after each use. Don Parsons