<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Jim,

 The old 235 / 320 / 360  tank sealer PRC which is now Pro-Seal from ACFT
Spruce can be thinned  to a pourable state with pure Toluene. Use about 25% by
weight.  With your wing off you can then pour some in and set the wing in a
position to coat the area you want while it cures. This also can protect your
fuel pickup in case its not removeable. My outboard bay(99.5 - 104)  was
leaking right through the main spar. Now its fixed and ok. If your aileron
pushrod tubes are round instead of square (also alum or glass) the glasswork
around that area is the first place I would be looking.......


Good Luck


Lloyd