Return-Path: Sender: (Marvin Kaye) To: lml Date: Mon, 11 Nov 2002 14:37:41 -0500 Message-ID: X-Original-Return-Path: Received: from mpls-qmqp-04.inet.qwest.net ([63.231.195.115] verified) by logan.com (CommuniGate Pro SMTP 4.0.1) with SMTP id 1860393 for lml@lancaironline.net; Mon, 11 Nov 2002 14:30:34 -0500 Received: (qmail 18040 invoked by uid 0); 11 Nov 2002 19:27:36 -0000 Received: from unknown (63.231.195.4) by mpls-qmqp-04.inet.qwest.net with QMQP; 11 Nov 2002 19:27:36 -0000 Received: from dnvr-dsl-gw20-poold68.dnvr.uswest.net (HELO marauder) (65.100.147.68) by mpls-pop-04.inet.qwest.net with SMTP; 11 Nov 2002 19:30:33 -0000 X-Original-Date: Mon, 11 Nov 2002 12:32:53 -0700 X-Original-Message-ID: <000001c289b9$21af8020$0300000a@marauder> From: "Mike Hutchins" X-Original-To: "Lancair Mailing List (E-mail)" Reply-To: Subject: Smart Level Zeroing for Angle Determination (Corrected) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 I left out a step in 2a. Below is the corrected version. To Zero your SmartLevel for normal use: 1) Turn on level and place in a flat spot. Wait 10-15 sec. 2) Press and hold RESET until CAL1 appears 3) Rotate level end for end and wait 10-15 sec. 4) Press and hold RESET until CAL2 appears. You are now ready to work To Zero your SmartLevel for relative angle determination: 1a) Perform Step 1 above in the baseline position, such as the elevator at full down 2a) Perform Steps 2-4 above, but DO NOT rotate end for end, leave it in the same position 3a) Angle measurements will now be relative to the baseline angle in 1a. I hope this helps. Regards, Mike Hutchins IV-P Wannabee