<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Hi

I'm busy lining everything up for the big cut. I fitted the main struts into
the GM4 and attached the one leg with the other using a straight edge. The
legs are folded of course.

Now using the blueprint template underneath and align it with the back of
the spar and the edge 2" way from the center point. It seems that there is
not enough clearance at two or so points around the edges.

Is this right?? Can I trust the template to be right?  Anyone with experience
and willing to share some input would be appreciated.

Pine Pienaar
pine@cpro.co.za
Lancair 360 #664