Return-Path: Received: from mailhub.cpro.co.za ([196.37.249.19]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Tue, 29 Dec 1998 10:12:08 -0500 Received: from default ([196.37.249.72]) by mailhub.cpro.co.za (Netscape Messaging Server 3.5) with SMTP id 196 for ; Tue, 29 Dec 1998 17:22:30 +0200 Message-ID: <000501be333e$5814ce20$48f925c4@default> From: "Pieter Pienaar" To: "LancairList" Subject: Wheel wel cutouts Date: Tue, 29 Dec 1998 17:16:31 +0200 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Hi I'm busy lining everything up for the big cut. I fitted the main struts into the GM4 and attached the one leg with the other using a straight edge. The legs are folded of course. Now using the blueprint template underneath and align it with the back of the spar and the edge 2" way from the center point. It seems that there is not enough clearance at two or so points around the edges. Is this right?? Can I trust the template to be right? Anyone with experience and willing to share some input would be appreciated. Pine Pienaar pine@cpro.co.za Lancair 360 #664