<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>

Hi Marv...
            I received a couple of e-mails indicating that other than the
title my message was blank.  I thought I would try again now that I have the
formatting straightened out.  Thanks for your help.

            I am assembling my small horizontal stab and have noticed that
there seem to be a number of different internal rib / spar layouts.  My kit
is a 235 and will, at least initially, have a 235 installed in it.  The
drawings supplied with the kit show 5 ribs and 1 full length aft closeout
spar.  The Lancair brochure of the same vintage as my kit shows a 320
horizontal stab with 6 ribs and 2 full length spars.  Does anyone have any
enough experience with these different internal structures to advise me
whether or not a deviation from the 235 drawings would be in order?

            Any other suggested changes to the 235 horizontal or vertical
tail would be greatly appreciated.


Thanks

Bill Olsen