<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I have 2000 psi hyd line from the brakes to a hard point in the wheel
well. I'm going to run aluminum from there into the foot well. My
question is this: I'm thinking of using 1/8" aluminum. Has anyone tried
this? The 1/8 inch stuff is much easier to route and lighter too, but
I'm having second thoughts regarding the flow capability of such tiny
tubing. What say y'all?

Bill Harrelson
harrelson@erols.com
N38BH


[It occurs to me that the steel brake lines used on automotive
applications are only 1/8" ID, and seem to have been adequate to
the task for a very long time... there is actually very little flow
through the system and I suspect that 1/8" AL tube will work admirably
on your 320.  Those are the same lines I intend to use in mine and
will be interested to hear other views on the situation.

    <Marv>]