Return-Path: Received: from imo27.mx.aol.com ([198.81.17.71]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Sun, 20 Dec 1998 20:12:08 -0500 Received: from N295P@aol.com by imo27.mx.aol.com (IMOv18.1) id 8IRAa22270 for ; Sun, 20 Dec 1998 20:12:52 +1900 (EST) From: N295P@aol.com Message-ID: Date: Sun, 20 Dec 1998 20:12:52 EST To: lancair.list@olsusa.com Subject: Uranium+water levels X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Dear LL: Uranium and Water levels Lead is used to balance out the weight of the control surface behind the pivot with weight ahead. You will need the same amount of weight to do so, regardless of using Lead or Uranium. Using Uranium will allow that weight to be a less voluminous mass, as it is denser than lead. The only way to use less weight is to have the balancing mass further ahead of the pivot: compromises, compromises, bigger swing radius, beefier support for a longer arm. arm sticks out of the sleek wing, etc. You might get by with a bit less weight by placing the smaller Uranium a bit further forward in the available space for the balance weight. Not a biggie. Finally, it's a far, far better place to be in by having a tad too much balance weight after painting, than not enough. A moment of drilling out some lead is so simple, with a ball of epoxy to seal the hole; then you're balanced! Agree that a water level is the way to go. Use a big hose: 3/4" with the 24" clear end tubings sold in hardware stores. Make sure there are no bubbles. Index at the bottom of the meniscus. Cap one end with your thumb when moving, get it close to the level you need and release. The colored water might be nice, but better to fill it before use with running water and insuring no bubbles in the line. The egyptians had it right: simple and effective! Robert Forest N295P