<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
     
     
     I am in the middle of painting my 360 with a PPG base coat/clear coat
     system.  I was able to peel off large samples of primer+color+clear
     coat from duct tape sealing up the aileron bell crank opening in the
     wing.  Weighing the samples on a good lab scale (0.0001 gram
     resolution) predicts the following:
     
     primer(non-sanding)+color(2 coats)+clear(2 coats)=15.2 lb
     2 coats of clear alone=4.1 lb
     
     Chris Zavatson
     N91CZ