Return-Path: Sender: (Marvin Kaye) To: lml Date: Thu, 02 May 2002 07:59:21 -0400 Message-ID: X-Original-Return-Path: Received: from [65.33.165.45] (account marv@lancaironline.net HELO marvkaye.lancaironline.net) by logan.com (CommuniGate Pro SMTP 3.5.9) with ESMTP id 1210459 for lml@lancaironline.net; Thu, 02 May 2002 01:48:57 -0400 X-Original-Message-Id: <5.1.0.14.2.20020502015050.045ef370@lancaironline.net> X-Sender: marvkaye@lancaironline.net (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 X-Original-Date: Thu, 02 May 2002 01:50:57 -0400 X-Original-To: lml@lancaironline.net From: "Steve & Claudette Colwell" (by way of marvkaye@lancaironline.net) Subject: [LML] Re: Foam Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Subject: [LML] Re: Foam > Lot's of things, all having to do with trying to get perfect > gaps. The > latest use was on the vertical and horizontal stabs on the > surfaces opposite > where the counterweights are. Ahhh perfect gaps, I spent way too much time seeking perfect gaps on the horiz stab/elevator and counter weights. Uniformity yes,.... tight, be careful! Primer and paint on opposing surfaces will close those gaps more than you might think. I rounded my counterweights using the inside of a PVC pipe cut in half with 80 grit stick-it and was very proud of the uniform gaps at the front and side. The method I used was 1/4" foam fitted to the cavities in the horiz stab then bonded to 1 bid of cloth on a flat surface with release. Slide the foam back in the cavity with micro on the edges and easily sand off the overhanging glass. Steve Colwell Legacy 2K Placerville,CA (530) 621-3408