Message-ID: <3C9B3D70.C94063FC@inficad.com>
Date: Fri, 22 Mar 2002 07:19:28 -0700
From: "Bart D. Hull" <bdhull@inficad.com>
Reply-To: bdhull@inficad.com
Reply-To: lancair.list@olsusa.com
MIME-Version: 1.0
To: lancair.list@olsusa.com
Subject: Re: Tubing for electical through wet wings.
References: <5.0.0.25.2.20020322082401.00abab48@pop3.olsusa.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
> My kit manufacturer included a 21' piece of Schedule 20 plastic tubing 
to use as the wiring runners through the wet wings of my Tango II. For
any of you builders out there
> that have run such tubes or wired through them, what did you use?

>  I'd like to run Auto Gas as I'm running a Subaru EFI, but don't know 
what additives etc. will or won't turn the tubing to jelly. Should I use
thin wall aluminum tube and
> just ground it for safety?

> ALL thoughts appreciated.... Bart D. Hull ......bdhull@qwest.net

Bart D. Hull
bhull@inficad.com


> See Pics of the Tango II at  http://www.inficad.com/~bdhull/tangoII.html
> or to see the Subaru Engine  http://www.inficad.com/~bdhull/Subaru.html


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>