From: JIMRHER@aol.com
Message-ID: <d3.73850d3.29add571@aol.com>
Date: Wed, 27 Feb 2002 01:23:45 EST
Subject: ES balance with MT Prop
To: lancair.list@olsusa.com
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Reply-To: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
 I have the 4-blade MT (and yes, it
looks marvelous!), which comes in at about 22 pounds lighter than the
3-blade Hartzell.  Only beef is that MT did a rotten job getting the spinner
centered -- the run-out must be around a quarter of an inch!

Jim Cameron
N143ES

Jim, I just balanced my 4 blade MT today and I thought it was very smooth 
before. My spinner just happens to be centered perfect, however, I know of 
one other that had the same run out that you have and just before it was to 
go to the propeller shop they removed the spinner and retraced the #1 blade 
markings and found that it was rotated, as I remember, 1 blade off. These 
were very experienced people and they couldn't believe that one of them could 
have done that, so maybe another look would find your problem. Good luck.

Jim Hergert
N6XE plane Sexy L4P
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>