<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Hi all,

My build partner and I are currently sharing a shop each building our own
fastbuild IV-P.  This evening we noticed that the wheels and Cleveland
breaks are assembled slightly differently and we cannot decided which is
correct.  The discrepancy is with the placement of the torque plate assy.
(which can be seen on page 23-21 of the manuals).  One project has it paced
against the axle with the wheel axle through the hole in the center.  The
other has the torque plate next to the spacer without the axle going through
it..  Our guess is that the hole in the center is for the axle but we'd like
to be absolutely sure.  No where in the manuals have we been able to locate
the entire assembly showing the axle, spacer and torque.  Your assistance
with be appreciated.

Also our shop is located in Columbus, OH so anyone traveling through the
central Ohio area is more than welcome to stop by.

thanks,

Joe Trepicone


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>