<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
    Best way to cut the light lenses is with a fine-toothed blade on a
bandsaw.  Lacking that, you can do it with an ordinary hacksaw, but you have
to really be careful to support the material as you cut.  Just putting a
soft rag under the bandsaw table will do it -- keep the rag about 1/4" away
from the blade.  Small scratches can be buffed out.
    Grinders, etc., are not too good for cutting this material, since it
heats up and gets gummy.

Jim Cameron
N143Es reserved


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>