<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Hi

The original plans that came with my 1991 model 320 showed the nose gear
angle to be 8 deg. The newer plans received from Vern shows it at 4 deg.

When I drilled the holes through the phenolic I was stunned with the fact
that the holes wasn't in the center of the phenolic block but rather towards
the back. But the double check on the plans showed my measurements to be
correct. Now a year later, after looking at a friends flying plane (which
happens to be #667 mine is #664) I realized the visual difference and
checked the old plans.

Would this be a typo. Please help!!

Pine Pienaar
pine@cpro.co.za
Lancair 360 #664




>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>