Bulent, I tried faxing to you on that number and a lady briefly answered the
phone.  This was at 0600 so I may have been a bit early and you may not have
had your phone set up for fax.  Just want to verify that is a fax number you
gave me.

Ed

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From: "Bulent Aliev" <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, July 08, 2004 10:25 PM
Subject: [FlyRotary] Re: LS1 Coils and Harness II


> Ed, I could use one too. My fax is: 954 946-2932
> Thanks.
> Bulent
>
> On 7/8/04 10:14 PM, "Ron Milligan" <ronmilligan@cox.net> wrote:
>
> > Thanks for the offer.  Someone else emailed me the schematic.  I figured
it
> > was included with Tracys instructions.  Once again email lists to the
> > rescue.
> >
> > Ron Milligan
> > RV7 QB Fuse
> >
> > -----Original Message-----
> > From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
> > Behalf Of Ed Anderson
> > Sent: Thursday, July 08, 2004 5:29 PM
> > To: Rotary motors in aircraft
> > Subject: [FlyRotary] Re: LS1 Coils and Harness II
> >
> >
> > Not to worry, Ron.
> >
> >   Tracy does have an LS1 coil wiring diagram.  Its not difficult at all
> > and I am certain that if you sent him  a SASE envelop he would be happy
to
> > mail you a copy.  The EC2 for the LS1 is slightly different than that
for
> > the Mazda stock coils, so they are not directly interchangeable.  So,
make
> > certain when you order your EC2 that you specify it is for LS1 coils.
> >
> > Do you have a fax number? I could try an fax you the sheet that has the
LS1
> > wiring diagram or you can get it from Tracy.
> >
> > Ed
> >
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html