Ed,

Just got all of my parts in the mail except the pins.  Thanks again for
doing all the research.  But now I realize I have no idea how to wire them!
If Tracy's EC2 covers it great please disregard (will order it in the
future).  If he doesn't please help me out one more time.  What do the 4
wires on the coil go to?  Speaking of which, Tracy will send out the
instructions for the EC2 if you mail him a SASE.  Anybody have it in
electronic form?  Tracy?

Thanks

Ron Milligan
RV7 QB Fuse
Aliso Viejo CA


-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Ed Anderson
Sent: Thursday, June 24, 2004 6:30 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: LS1 Coils and Harness II


Hi Ken

  The vendor is a WAYTEK, Inc.  The plugs are Packard-Delphi Metri-pack
150 series.  If you go to their web site and enter their part numbers
(below) it will bring up the item and a page with photos of the items.  The
pins were the only thing I did not receive (they are back-ordered) so can't
show you any yet.

URL is http://www.waytekwire.com/

Let me know if you have any further questions

Ed

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC


38207 METRI-PACK 150 SERIES 4 PIN (the Plug housing)

 39006 PACKARD CABLE SEAL-DARK RED (small red seals that seals the
individual wire)

31077 METRI-PACK 150 SERIES (This is the terminals I haven't received yet)

38208 METRI-PACK 150 SERIES 4 PIN (This is a tension reliever and clamp that
seals the pins in the housing.

422 PED ALL PURPOSE REMOVAL TOOL (This was a pin removal tool that I though
was cheap enough to buy it)


There is a minimum order for all items like around $5.00.  So you end up
with something like 51 terminal pins when you only need 16.

Just to repeat, this is for the 2004 Corvette 5.7L 350 CID engine and its
LS1 coil that carries AC Delco Part number D580 and GM part number 12558948.






>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html