|
|
It sounds like you're getting closer and closer. One day soon.....
I thought you might be interested, so I'm passing along a photo of the connection between one of the intercoolers and the turbo on the Eagle... given the amount of pressure involved, solid AL tubing is preferred, and the blue hose is braided silicone, good to about 500 degrees or so. The gap between solid tubes that the hose is covering is only about an inch. It's ridiculously expensive (I think about $22/foot) but perfect for the task. FWIW.
<Marv>
"Steve Brooks" <steve@tsisp.com> wrote:
" I still have the fitting I made, in case I need to transfer the intake from
the cooling plenum back to the intercooler, which was the 3rd modification.
But that was only a temporary rigging, and if I need to go back to it, I'll
have to make it a little more permanent than splicing it in with SCAT
tubing. (at least there was no duct tape involved). "
|
|