John,
This
certainly isn’t good news. I
haven’t had any trouble YET, but it would appear that perhaps my days are
numbered. I haven’t been hitting
the turbo too much in cruise, and just 5 lbs on take off and climb. That’s probably why mine is OK so
far.
I
found it very interesting that turning the mixture more rich increased your
RPMs. I would have expected the
exact opposite with the lower amount of intake air. I would have thought that you would
have to lean it out to increase the power. Maybe the wheel was obstructing the
exhaust or something.
It
certainly doesn’t give me a warm fuzzy
feeling.
Steve
Brooks (Rusty – where did you buy your muffler
?)
-----Original
Message-----
From: Rotary
motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of John Slade
Sent: Tuesday, July 06, 2004 1:27
PM
To: Rotary motors in
aircraft
Subject: [FlyRotary]
Second stock turbo bites the dust
Steve,
Dave and anyone else running a stock single stage turbo - you might want to
pay attention....
This
morning I managed to break Rusty's turbo. I had been cruising at 11,000
ft with MAP 38, rpm 5100 and 175 kts TAS (about 155 IAS) for almost 2 hours
when rpm suddenly dropped to 2500. A 1/4 turn of the mixture toward rich
brought it up to 3500. Fuel pressure was 40psi, but I turned on the other pump
anyway. Coolant temp dropped from 185 to 150 and EGT dropped from 1400 to
1000. Oil pressure was constant at 90PSI.
I was 38
miles from home over a desolate little strip by Lake Okeechobee. I figured I
could glide to either field from halfway, so I headed home. The engine ran
consistently at reduced power. I maintained 11,000 to the halfway point, then
began a gradual decent to arrive over the field at 6000. Once assured of the
field I tried killing alternate sets of coils - both gave a decrease in rpm -
and alternate sets of injectors - both killed the engine, (or reduced rpm
enough that I didn't want to know).
One
[more] high & fast precautionary landing later and the plane was back
in the hangar. I'd thought the new Radio Shack resistors on my secondary
injectors might have given out, but no. A quick look up the exhaust pipe told
the story. The compressor wheel is sitting at an odd angle blocking the
outlet, just like last time. Apparently I was trailing a vortex of black smoke
as I descended into the pattern. This probably helped keep the spam cans
and whirly birds at bay while I took the active. :)
One
failure might be a bad turbo. A second one is enough to prove to me that the
stock turbo just can't handle the punishment of continual boost. (just like Ed
said it wouldn't :)
I
thought you guys running or planning to run the same turbo might like to hear
the story as soon as possible.
Regards,
John
(boost for all you're worth) Slade
Now
where's the phone number of that Ozzie guy????
-----Original
Message-----
From: Rotary
motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of Alex Madsen
Sent: Tuesday, July 06, 2004 10:15
PM
To: Rotary motors in
aircraft
Subject: [FlyRotary]
Re: Into the blue again :-)
No they use solid
state. I think it is 2GB Compact Flash.
It says somewhere on their web site. You can get 2 GB CF cards and IDE
adapters for them.
Alex
Madsen
-----Original
Message-----
From: Rotary
motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Finn Lassen
Sent: Tuesday, July 06, 2004 7:27
AM
To: Rotary motors in
aircraft
Subject: [FlyRotary]
Re: Into the blue again :-)
Hmmm.... Doesn't the Blue Mountain and other glass
panels use harddrives?
I thought that the inside of a harddrive was
sealed.
Picking a random drive on Seagate's website:
Environmental
Operating Temperature (°C) 0 to 60
Nonoperating Temperature (°C) 70 to
-40
Operating Shock (Gs) @ 2 msec 63
Non Operating Shock (Gs) @ 2 msec
350
Acoustics,Idle (Bels-typ sound power)
2.2
No
mention of ambient pressure.
Finn
Ed Anderson wrote:
Boy, now here is an example of what kind of information we have access to on
this list. Now that Ernest mentions it, yeah, I recall that the heads of
the hard disk float on a cushion of air - but, I would never have thought to
associate altitude with hard drive crashes! Thanks Ernest.
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From: "Ernest Christley" <echristley@nc.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, July 04, 2004 5:48 PM
Subject: [FlyRotary] Re: Into the blue again :-)
Message Today we flew for 6.3 hrs and everything was great again. We
calibrated a few items including the electronic governor for the IVO
What a difference that makes. Also calibrated the PSS AOA and the Dynon
and they each are phenomenal tools. The engine is running great with no
major issues at all. I do have a little tweaking to do on the low MAP
but nothing urgent. Then only problem that I had today was that my Sony
laptop doesn't seem to like high altitude. I have a small Vaio and have
built a place for it to mount easily and use it to display Jeppenson's
FlightMap in-flight GPS program. It works great until 10,300' where it
then display the blue screen and then reboot. After the 4th time it
to reboot again so now I'm forced to use the system recovery disc and
the disc clean. I hate to think about all the files that I said I would
back-up soon... :-(. My old laptop still works fine(using it now) so
All hard drives have a spinning platter with a read/write head riding a
cushion of air just above it. Go to 10,300' and there isn't much of a
cushion left. The head will fall into the platter turning at 7500 or
10000 rpm. I think you'll be lucky if the drive ever works again.
--
http://www.ernest.isa-geek.org/
"Ignorance is mankinds normal state,
alleviated by information and experience."
Veeduber