Mailing List flyrotary@lancaironline.net Message #9375
From: John Slade <sladerj@bellsouth.net>
Subject: RE: [FlyRotary] Re: EC2 programming
Date: Fri, 2 Jul 2004 13:13:51 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
>Without the EM-2, you have very little idea of where you're at, or which way to go. 
Aint that the truth!
Thanks for the encouragement, Mark.
 
Today I went to start up, and got nothing on computer A. Eventually, after getting no attempt to run at all on A I switched to B and she fired right up. Didnt run very well, but well enough. Any attempt to switch back to A and it died immediately wherever I set the mixture. Back in the hangar I reset mode 3 to the defaults and tried a start on A. It started up. Over rich, but running.
 
It seems like all the mode 3 lowering I did last night had no effect till I turned the EC2 off and back on again. Is that possible?
 
This is getting really frustrating.
 
John Slade
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster