|
Kevin, The oil filter in the stock application receives
unfiltered oil in threw the banjo fitting where it can either go to the relief
valve (first hole) down (normally no flow) or to the outside of the
filter, up. The oil then goes threw the filter (filtered oil) to the center of
the filter and down to the oil galley (second hole). The adapter you have
replaces only half of that system, and allows you to plumb the oil
system.
You have to add a remote oil filter
so that only filtered oil gets to that adapter. Then, filtered oil goes
down to both the relief valve and the oil galley.
Who's confused??? If you were here, I could show
you.
Bob Darrah
----- Original Message -----
Sent: Thursday, July 01, 2004 9:35
PM
Subject: [FlyRotary] Re: remote oil
adapter
OK , I'll try again with
drawings. I can't figure out how oil would be forced thru the filter
when all the ports are connected. why would oil pass thru the filter
when it can simply go around? the guy that sold these, I forget who it
was off hand, assured me that it was correct.
|