Return-Path: Received: from mail0.mx.voyager.net ([216.93.66.205] verified) by logan.com (CommuniGate Pro SMTP 4.2b6) with ESMTP id 231283 for flyrotary@lancaironline.net; Tue, 29 Jun 2004 20:20:25 -0400 Received: from u036fr3za011 (d27.as0.wtma.wi.core.com [64.77.136.155]) by mail0.mx.voyager.net (8.12.9/8.10.2) with SMTP id i5U0JrqY003561 for ; Tue, 29 Jun 2004 20:19:54 -0400 (EDT) Message-ID: <005101c45e38$9c4ba840$3c40fea9@u036fr3za011> From: "Barnhart" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: Fuel System Question Date: Tue, 29 Jun 2004 19:24:29 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 My return line is about an inch above the fuel pick ups. Low. The idea is give the fuel time to cool and to not be creating fuel vapors in the wing. The fuel will get back to the tank with the higher fuel pressures coming off the feed rail. This is a high wing install and not flying. Barny MGDQ 20bt ----- Original Message ----- From: Dale Rogers To: Rotary motors in aircraft Sent: Tuesday, June 29, 2004 12:34 PM Subject: [FlyRotary] Re: Fuel System Question > Hi All, > > > From: "Ron Milligan" > > Date: 2004/06/29 Tue AM 01:01:22 EDT > > To: "Rotary motors in aircraft" > > Subject: [FlyRotary] Fuel System Question > > > >... My > > question is, if I plumb the transfer line (one tank to the other) into the > > fuel return line (coming from the engine) will the facet fuel pump have > > enough pressure to over come the returning fuel? Is the returning fuel > > under any pressure at all or just flowing back to the tank? > > Let's look at this logically. The only time you'll > have fuel returning to the tank is when the engine is > running (or a few seconds after shutdown). The fuel pump > is creating a negative pressure situation inside the tank > by removing fuel. The engine is burning some of the fuel > being pumped out of the tank, so there will always be less > fuel coming back than is being pumped out. Therefore, there > should never be a head pressure against the return line - > unless one positions the return outlet below the level of > fuel. Put the end of your return line near top center and > you should never have a problem. > > Regards, > Dale R. > COZY MkIV-R13B #1254 > > > > > > > > >> Homepage: http://www.flyrotary.com/ > >> Archive: http://lancaironline.net/lists/flyrotary/List.html > > > _____________________________________________________ > This message scanned for viruses by CoreComm >