----- Original Message -----
From: "Al Gietzen" <alventures@email.msn.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, January 15, 2003 5:06 PM
Subject: [FlyRotary] Re: Plugging oil outlet in rear housing


> I am wondering how I am going to plug the heater water outlet that is in
> your picture.  Anyone have the solution?
>
> Racing Beat sells a Heater Water Outlet plug.  It's a threaded hexhead
> plug - must be the right size to thread into that outlet.
>
> Al

Cut the pipe off flush.  Drill to required size for 3/8 npt tap (its very
close already so you may not even need to drill if you are carefull with the
tap..  Screw in 3/8 NPT plug.

Tracy Crook