Perry,
Yes the injectors fit the 460cc low impedance NA injectors. I have an 86-89
block/injection system and the MSD connectors fit fine.
I noticed they raised their price in the last 2 days to $14.60, which still
beats all the competition. I priced them in several places.
Another link to the same retailer:
http://www.cprace.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=MSD-24
00&Category_Code=MSDFUEL
Chris
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Perry Mick
Sent: Tuesday, April 20, 2004 10:32 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Fuel Injector Connectors
Thanks Chris, that is what I'm looking for, if they fit the '86 Mazda NA
injectors.
Chris Sargent wrote:
The link below has MSD connectors available as an 8-connector kit for
$12.60, which includes shipping. They're an improvement over standard
connectors in that the spring clip to remove the connector is easy to
remove
with your fingers and won't come off (captured). The kit includes:
- 8 connectors, wire clips, and weather-tight seals
- 20 female pin connectors
http://www.cprace.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=MSDF
U
EL
Go to the bottom of the page. The last entry looks like this:
EFI Injector Weather tight Connectors
Code:MSD-2400
Price:$12.60
I received a set recently and the quality is as good or better than the
Nissan wiring harness I bought a while back (the wire clips are much easier
to use), plus you can wire your Mil Spec wire directly to the pins.
Happy connecting,
Chris Sargent (way behind on starting my RV-7)
Huntsville AL
-----Original Message-----
Behalf Of Perry Mick
Subject: [FlyRotary] Fuel Injector Connectors
I believe awhile back someone posted a source and part numbers for the
mating connectors to the Mazda fuel injectors. I can't locate that email.
If
anyone has that info, could you please repost it? Thanks,
Perry